REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the tailgate lower trim (see Tailgate trim: Removal
- Refitting) (73A, Non-side opening elements trim),
- the tailgate lock (see Tailgate lock: Removal - Refitting)
(52A, Non-side opening element mechanisms),
- the rear screen wiper arm (see 85A, Wiping -
Washing, Rear screen wiper arm: Removal - Refitting,
page 85A-13) .
II - REMOVAL OF PART CONCERNED
- Remove the nuts (2) from the tailgate trim (1) .
- Disconnect the connector (3) from the tailgate locking
switch.
- Unclip the tailgate trim.
- Remove the tailgate trim.
- Remove:
- the bolts (4) from the tailgate locking switch support,
- the tailgate locking switch (5) from the support.
REFITTING
I - REFITTING PREPARATION OPERATION
- Check the condition of the clips on the tailgate trim.
- Replace the clips if they are damaged.
II - REFITTING PART CONCERNED
- Refit:
- the tailgate locking switch on the tailgate trim with
the support,
- the bolts of the tailgate locking switch support,
- the tailgate trim on the tailgate,
- the tailgate trim nuts.
- Connect the tailgate locking switch connector.
III - FINAL OPERATION.
- Refit:
- the rear screen wiper arm (see 85A, Wiping -
Washing, Rear screen wiper arm: Removal - Refitting,
page 85A-13) ,
- the tailgate lock (see Tailgate lock: Removal - Refitting)
(52A, Non-side opening element mechanisms),
- the tailgate lower trim (see Tailgate trim: Removal
- Refitting) (73A, Non-side opening elements trim).
|