Note:
In case of an electrical fault, it is possible to open
the tailgate manually.
Carry out this operation from inside the vehicle.
Unlock the tailgate by turning the fastener (1) in the
direction of the arrow. |
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the tailgate lower trim (see Tailgate trim:
Removal - Refitting) (73A, Non-side opening elements
trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Disconnect the tailgate opening switch connector (2)
.
Note:
Carefully unclip the tailgate opening switch cover
to avoid damaging it. |
- Separate the cover (3) from the tailgate opening
switch.
- Remove the tailgate opening switch assembly.
- Unclip the tailgate opening switch (4) by pressing on
the clips in the direction of the arrows.
- Remove the tailgate opening switch from its support.
REFITTING
I - REFITTING PREPARATION OPERATION
- Check the condition of the tailgate opening switch
cover.
- Replace the cover if it is damaged.
II - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the tailgate opening switch on the cover,
- the tailgate opening switch assembly on the tailgate.
- Connect the tailgate opening switch connector.
III - FINAL OPERATION.
- Refit the tailgate lower trim (see Tailgate trim: Removal
- Refitting) (73A, Non-side opening elements
trim).
|