REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the rear bench seatback (see 76A, Rear seat frames
and runners, Complete rear seat: Removal
- Refitting, page 76A-1) ,
- the luggage compartment floor lining (see 71A,
Body internal trim, Luggage compartment floor
lining: Removal - Refitting, page 71A-17) ,
- the C-pillar lower trim (see 71A, Body internal
trim, C-pillar lower trim: Removal - Refitting,
page 71A-9) ,
- the rear end panel lining (see 71A, Body internal
trim, Rear end panel lining: Removal - Refitting,
page 71A-16) ,
- the rear floor carpet.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the bolts (1) ,
- the relay nuts (2) ,
- the clip (3) ,
- the relay unit and the handle,
- the cable.
- Remove
- the bolts (4) ,
- the clips (5) ,
- the lever unit,
- the cable.
- Remove:
- the bolts (6) of the rear bench seatback striker panel,
- the rear bench seatback striker panel.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the rear bench seatback striker panel,
- the bolts of the rear bench seatback striker panel.
- Torque tighten the bolts of the rear bench seatback
striker panel (40 N.m).
- Refit:
- the cable,
- the lever unit,
- the clips (5) ,
- the bolts (4) ,
- the cable,
- the relay unit and the handle,
- the clips (3) ,
- the bolts (1) ,
- the relay nuts (2) .
- Torque tighten the relay nuts (25 N.m).
II - FINAL OPERATION.
- Refit:
- the rear floor carpet,
- the rear end panel lining (see 71A, Body internal
trim, Rear end panel lining: Removal - Refitting,
page 71A-16) ,
- the C-pillar lower trim (see 71A, Body internal
trim, C-pillar lower trim: Removal - Refitting,
page 71A-9) ,
- the luggage compartment floor lining (see 71A,
Body internal trim, Luggage compartment floor
lining: Removal - Refitting, page 71A-17) ,
- the rear bench seatback (see 76A, Rear seat frames
and runners, Complete rear seat: Removal
- Refitting, page 76A-1) ,
|