Seatback tray: Removal -
Refitting
FRONT SEAT TYPE 02
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the nuts (1) ,
- the seatback table.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the seatback table,
- the nuts (1) .
Front seat headrest guide:
Removal - Refitting
IMPORTANT
To prevent the pyrotechnic components from being
permanently deactivated or triggered (airbags or
pretensioners), wait for at least 3 minutes after disconnecting
the battery. |
IMPORTANT
Never handle the pyrotechnic systems (pretensioners
or airbags) near to a source of heat or naked
flame - they may be triggered. |
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Disconnect the battery (see Battery : Removal -
Refitting) (80A, Battery).
- Remove:
- the compete front seat (see 75A, Front seat frames
and runners, Complete front seat: Removal
- Refitting, page 75A-6) ,
- the seatback table (see 79A, Seat components,
Seatback tray: Removal - Refitting, page 79A-1)
,
- the front seat belt buckle stalk (see Front seat belt
buckle: Removal - Refitting) (88C, Airbag and
pretensioners),
- the head rest.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the seat slide and the height adjuster
switch (1) .
FRONT SEAT TYPE 01
- Remove the height adjuster lever (1) .
- Unclip the seat trim (2) .
- Remove the retaining strip (3) .
- Remove the bolt (4) .
- Unclip the trim at (5) and (6) .
- Disconnect the connector.
- Remove the bolt (7) .
- Unclip the trim at (8) and (9) .
- Remove the lumbar adjustment lever knob (10) .
- Open the zip fasteners (11) .
- Extract the headrest guides (12) from the support.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the headrest guides on the support.
- Close the zip fasteners.
- Refit:
- the lumbar adjustment lever knob,
- the trim ,
- the bolt (7) ,
- the connector,
- the trim ,
- the bolt (4) ,
- the retaining strip,
- the seat trim (2) .
FRONT SEAT TYPE 01
- Refit the height adjustment lever.
- Refit the seat slide and the height adjuster switch.
II - FINAL OPERATION.
- Refit:
- the headrest,
- the front seat belt buckle stalk (see Front seat belt
buckle: Removal - Refitting) (88C, Airbag and
pretensioners),
- the seatback table (see 79A, Seat components,
Seatback tray: Removal - Refitting, page 79A-1)
,
- the entire front seat (see 75A, Front seat frames
and runners, Complete front seat: Removal -
Refitting, page 75A-6) .
- Connect the battery (see Battery : Removal - Refitting)
(80A, Battery).
Rear centre arm rest:
Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the rear central armrest clip (1) ,
- the rear central armrest at (2) and (3) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the rear central armrest,
- the rear central armrest clip.
Rear bench seat headrest
guide: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the headrest,
- the rear bench seatback trim, partially (see 78A,
Rear seat trim, 1/3 and 2/3 rear bench seat seatback
trim: Removal - Refitting, page 78A-3) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Extract the headrest guides (1) from the support.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the new headrest guides on the support.
II - FINAL OPERATION.
- Refit:
- the rear bench seatback trim (see 78A, Rear seat
trim, 1/3 and 2/3 rear bench seat seatback trim:
Removal - Refitting, page 78A-3) ,
- the head rest.
|