REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the rear seat base hinge cover (1) .
- Remove the lower bolts (2) from the rear seat base.
- Tilt the rear seat base (4) .
- Remove:
- the rear seat base upper bolts (3) ,
- the rear seat base (4) .
- Remove:
- the side hinge cover,
- the seatback nuts (5) ,
- the rear centre seat belt lower bolt.
- Remove:
- the seatback bolts (6) ,
- the seatback.
Note:
If the vehicle is equipped with the Easy Break
system, partially remove the carpet in order to
disconnect the cable from the control unit. |
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Fit the seatback.
- Refit:
- the seatback bolts,
- the seatback nuts,
- the rear centre seat belt lower bolt.
- Torque tighten:
- the seatback bolts (25 N.m),
- the seatback nuts (25 N.m),
- the lower bolt of the rear central seat belt (49
N.m).
- Refit:
- the side hinge cover,
- the seat base,
- the rear seat base upper bolts,
- the rear seat base lower bolts.
Note:
If the vehicle is equipped with the Easy Break
system, reconnect the control unit cable. |
- Torque tighten:
- the upper bolts of the rear seat base (28 N.m),
- the lower bolts of the rear seat base (28 N.m).
- Refit the rear seat base hinge cover.
Note:
If the vehicle is equipped with the Easy Break
system, check that the system is operating correctly. |
|