REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the front door sill lining (see Front door sill lining:
Removal - Refitting) (71A, Body internal trim),
- the rear inner sill trim (see Rear door sill lining:
Removal - Refitting) (71A, Body internal trim),
- the B-pillar trim (see B-pillar trim: Removal - Refitting)
(71A, Body internal trim),
- the central console (see Centre console: Removal
- Refitting) (57A, Interior equipment),
- the rear bench seat base (see Complete rear
seat: Removal - Refitting) (76A, Rear seat frames
and runners).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the clips (1) .
- Remove:
- the rear carpet at (2) ,
- the rear section of the front carpet at (3) .
- Remove the rear heating duct (4) .
- Remove the rear floor soundproofing (5) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the rear floor soundproofing,
- the rear heating duct,
- the front carpet,
- the rear carpet,
- the clips.
II - FINAL OPERATION.
- Refit:
- the rear bench seat base (see Complete rear
seat: Removal - Refitting) (76A, Rear seat frames
and runners),
- the central console (see Centre console: Removal
- Refitting) (57A, Interior equipment),
- the B-pillar trim (see B-pillar trim: Removal - Refitting)
(71A, Body internal trim),
- the rear inner sill trim (see Rear door sill lining:
Removal - Refitting) (71A, Body internal trim),
- the front door sill lining (see Front door sill lining:
Removal - Refitting) (71A, Body internal trim).
|