If fitted on the vehicle, the tailgate locks and unlocks at the same time as the doors. Depending on the vehicle, you have several different ways to manoeuvre the tailgate:
Conditions of use
Opening/Closing Activating the automatic tailgate opening or closing using the dashboard control or using the RENAULT card causes three beeps to sound just before the tailgate begins to move.
Using the RENAULT card remote control With the ignition off, press and hold switch 1 on the RENAULT card.
Using the tailgate exterior opening control Press control 2.
Using the tailgate interior closing control Press control 3.
Using the dashboard control Depending on the vehicle, press and hold switch 4. Using the hands-free function The hands-free function grants access to the boot or allows it to be closed while you have your hands full. With the RENAULT card on your person and with the ignition off, perform a forwards/ backwards movement with your foot under the rear bumper. The sensor detects the approach and removal of your foot and triggers the opening or closing of the tailgate.
Do not keep your foot in the air. Carry out the movement without stopping. Note: With the tailgate open, after detecting a closure control, it waits around 3 seconds before triggering the closure (a beep is emitted every second). Activation/deactivation of the hands-free function Using the multifunction screen, select menu "Vehicle", "User settings" then "Use handsfree card: open/close". Select "ON" or "OFF" to activate or deactivate the function. Usage features of the hands-free function
Stopping the tailgate manoeuvre The automatic tailgate manoeuvre can be stopped at any time by a short press on one of the controls. Depending on the opening position, the tailgate hatch can however continue to be opened manually. If the tailgate is stationary in the intermediate position, your next press will move the tailgate in the opposite direction to when you stopped it. Manual mode After stopping the tailgate, you can perform the manoeuvre manually if you wish. You can switch to automatic movement at any time by pressing one of the controls. Obstacle detection When the tailgate window encounters an obstacle (presence of an object or person) when it is moving, it stops. Depending on the opening position, the tailgate hatch can however continue to be opened manually. Press the tailgate opening/closing control to reperform the tailgate movement in the same direction as before encountering the obstacle.
Limiting the tailgate opening angle You can adjust the maximum tailgate opening height It will always stop at the chosen position:
Precautions during use Before opening/closing the tailgate, ensure that the surrounding space is sufficient to allow the tailgate to operate. If not, stop the tailgate movement with the external tailgate control and hold the tailgate in position by hand (the tailgate may continue to open manually). If the tailgate is moving and the engine is started, the movement will stop for a seconds before continuing. Avoid multiple manual stops during the automatic tailgate movement (risk of damaging the tailgate system). Make sure that the sensors are not obscured (by dirt, mud, snow, road salt etc.). Operating faults If you activate the automatic tailgate continuously for around a minute (sequence of opening and closing), it will stop in order to avoid overheating. The operation will return to normal after about a minute. The automatic tailgate will not operate if the battery is on low charge. In this case, operate the automatic tailgate with the engine started. Note In very cold weather conditions, the automatic opening may not operate if the trunk lid joints are frozen.
|
Renault Koleos Service Repair Manual > Vehicle bodywork specifications: Vehicle panel gaps: Adjustment value
WARNINGThe clearance values are given for information purposes. When adjusting clearances, certain rules have to be followed: maintain symmetry with respect to the opposite side, ensure the flush fitting is correct, check correct operation of the opening, and water/ air-tightness. All values are gi ...