CRUISE CONTROL
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the centre front panel side trim (1) .
- Remove the plate (2) from the gear lever (see Centre
console: Removal - Refitting) (57A, Interior
equipment).
- Remove:
- the centre front panel lower covers (3) on both
sides,
- the glovebox (see Glovebox: Removal - Refitting)
( 57A, Interior equipment),
- the dashboard lower cover on the driver's side (see
Dashboard: Removal - Refitting) (57A, Interior
equipment).
- Remove:
- the centre front panel side trims (4) on both sides,
- the CD multi-changer (see 86A, Radio, CD changer:
Removal - Refitting, page 86A-14) ,
- the radio (see 86A, Radio, Radio: Removal - Refitting,
page 86A-4) .
- Remove:
- the starter control panel bolts (5) ,
- the starter control panel.
- Disconnect the connectors.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Unclip the switch clips (6) .
- Remove the switch.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the switch on the control panel.
- Connect the connectors.
- Refit:
- the starter control panel,
- the starter control panel bolts.
II - FINAL OPERATION.
- Refit:
- the radio (see 86A, Radio, Radio: Removal - Refitting,
page 86A-4) ,
- the CD multi-changer (see 86A, Radio, CD changer:
Removal - Refitting, page 86A-14) ,
- the centre front panel side trims on both sides,
- the dashboard lower cover on the driver's side (see
Dashboard: Removal - Refitting) (57A, Interior
equipment),
- the glovebox (see Glovebox: Removal - Refitting)
( 57A, Interior equipment),
- the centre front panel lower covers on both sides,
- the gear lever plate (see Centre console: Removal
- Refitting) (57A, Interior equipment),
- the centre front panel side trim.
|