REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the rear parcel shelf (see Rear parcel shelf: Removal
- Refitting) (57A, Interior equipment),
- the rear door sill lining (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting,
page 71A-8) ,
- the luggage compartment floor lining (see 71A,
Body internal trim, Luggage compartment floor
lining: Removal - Refitting, page 71A-17) ,
- the rear panel trim (see 71A, Body internal trim,
Rear end panel lining: Removal - Refitting, page
71A-16) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the lower bolt (1) from the rear seat belt,
- the bolt (2) ,
- the rear seat control handle (option),
- the luggage compartment light (3) ,
- the rear seat striker panel trim (4) .
- Disconnect the connector.
- Remove the C-pillar lower trim.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Connect the connector.
- Refit the C-pillar lower trim.
- Torque tighten the rear safety C-pillar lower bolt
(49 N.m).
- Refit:
- the rear seat control handle (option),
- the bolt,
- the luggage compartment light.
II - FINAL OPERATION.
- Refit:
- the rear panel trim (see 71A, Body internal trim,
Rear end panel lining: Removal - Refitting, page
71A-16) ,
- the luggage compartment floor lining (see 71A,
Body internal trim, Luggage compartment floor
lining: Removal - Refitting, page 71A-17) ,
- the rear door sill lining (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting,
page 71A-8) ,
- the rear parcel shelf (see Rear parcel shelf: Removal
- Refitting) (57A, Interior equipment).
|