RIGHT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the glovebox (see Glovebox: Removal -
Refitting) (57A, Interior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Disconnect the fan assembly connector (1) .
- Remove the fan assembly bolt (2) .
- Turn the fan assembly clockwise (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Turn the fan assembly anti-clockwise (4) .
- Refit the fan assembly bolt.
- Connect the fan assembly connector.
II - FINAL OPERATION.
- Refit the glovebox (see Glovebox: Removal - Refitting)
(57A, Interior equipment).
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the dashboard lower cover on the driver's side (see
Dashboard: Removal - Refitting) (57A, Interior
equipment),
- the lower cover on the left-hand side of the centre
panel (see Dashboard: Removal - Refitting)
(57A, Interior equipment),
- the driver's side A pillar air distribution duct (see
Front air distribution duct: Removal - Refitting)
,
- the brake and accelerator pedal assembly (see Accelerator/
brake pedal assembly: Removal - Refitting)
(37A, Mechanical component controls).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the fan assembly connector (1) .
- Remove the fan assembly bolt (2) .
- Turn the fan assembly clockwise (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Turn the fan assembly anti-clockwise (4) .
- Refit the fan assembly bolt.
- Connect the fan assembly connector.
II - FINAL OPERATION.
- Refit:
- the brake and accelerator pedal assembly (see Accelerator/
brake pedal assembly: Removal - Refitting)
(37A, Mechanical component controls),
- the driver's side A pillar air distribution duct (see
Front air distribution duct: Removal - Refitting)
,
- the lower cover on the left-hand side of the centre
panel (see Dashboard: Removal - Refitting)
(57A, Interior equipment),
- the dashboard lower cover on the driver's side (see
Dashboard: Removal - Refitting) (57A, Interior
equipment).
|