Renault Koleos Service Repair Manual: Rear floor: General description

Renault Koleos Service Repair Manual / Panelwork / Rear lower structure / Rear floor: General description

Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part.

Before reading the following information, make sure that there are no special notes associated with the vehicle. These special notes are specified if necessary in other parts of the sub-section dealing with the component.

Note: For a detailed description of welded connections, see MR 400.

IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies.

DESIGN OF THE STRUCTURAL COMPONENT

Rear lower structure

This part has the special feature of combining the functions of the rear side member, the rear wheel arch, the rear floor panel central cross member and the rear end panel, and to be comprised of several sorts of panels of different thicknesses and types.

Rear lower structure

Rear floor, front section: Description

See More:

Renault Koleos Service Repair Manual > Fuel mixture: Inlet duct: Removal - Refitting
2TR REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift . Remove the engine cover. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the bolt (1) from the air resonator, the oil vapour rebreathing pipe clip (2) . Disconnect the oil vapour rebreathing pipe. Loosen the ...

Renault Koleos Owners Manual

Renault Koleos Service Repair Manual

0.0087